Cools, humidifies and cleans the air creating your local perfect microclimate.
Technological innovation turned into efficient and green solution which is based on EvaBreeze material we use in our evaporative cartridge pads. evaLIGHT works on 10W power and has highest possible cooling power\energy efficiency rating.
Founded in 2015, Evapolar was created to disrupt the AC industry. By focusing on cooling the individual rather than a whole room or area, evaLIGHT EV-1000 recognised the huge savings that could be made on energy and money by creating microclimates. Evapolar’s products are now cooling 32 000 + people in 125 countries around the world.
Our stylish and compact advanced air conditioner cools, humidifies and cleans the air creating comfort zone where you need it most.
Regular ACs provide unnatural cooling spreading bacteria if the system is not maintained in time. Not to mention these systems are coomplex and expensive to run. Let your beloved ones to have a healthy and gentle natural cooling.
Keep your workspace comfortable and brainstorm with a clear mind with an independent source of fresh air. You do not need to reply on central AC coverage or bargain on right temperature set with your mates.
Put your first personal air conditioner anywhere you want to get gentle cooling while exercising.
Evapolar air conditioner is easy to operate: simply fill the removable water tank and connect EV-1000 to a power supply. Withing 5-10 min the evaporative cartridge absorbs a huge amount of water. The water then spreads evenly on the surface of the cooling pads. When the air blow through the pads, the water evaporates which makes the air cool down while saturating it with water. There’s no heat exhaust as a result of the evaporation.
How does Evapolar cool the air?
Our air conditioner works on evaporative principle. Heat loss is caused by water evaporation. This process absorbs the heat. Our material has increased specific evaporation area and improved capillary effect (effect of fluid lifting through thin tubes) that allows Evapolar devices to cool the air better than competitors and be small and portable.
What does the cooling degree depend on?
The cooling degree depends on three factors: the outside air temperature, the air humidity, and the power of the device that you select yourself. The working principle of our products is based on the evaporation process. The higher the temperature and the lower the humidity, the more actively the evaporation occurs, leading to a greater cooling effect.
The last factor that influences the temperature change is the fan speed. By adjusting it, you can choose the most comfortable temperature for you.
How much does Evapolar reduce the temperature and what area can it cool down?
The information about cooling effect in different environments is listed in technical specifications (see the respective Technical Spec section). We believe that the tables will help you estimate effectiveness of evaLIGHT for your conditions.
The cooling zone of evaLIGHT is 3-4 square meters. It is a personal device developed specifically for small areas.
What do you mean by eco-friendliness of the device?
We care about your health as well as the health of our planet. The evaporative materials used in the device consist of completely inorganic fibers. This makes Evapolar products different from conventional air conditioners where filters are made out of cellulose, a nutritional environment for microorganisms. The second important thing is that we do not use any harsh chemical liquid coolants, that can damage one’s health, for cooling. Finally, evaLIGHT consumes only 10W of electricity, which is equal to the power of a single light bulb. Nowadays energy saving doesn’t only have economic benefits, it also helps us to reduce our consumption of natural resources, as well as an emission of harmful substances into the atmosphere.
Does Evapolar work without a power supply?
When using Evapolar air coolers, please make sure you connect the device to a power supply. It can be almost any USB hub. You can plug your device into a power bank or a USB-port of your car, a laptop or a solar battery. The only condition is that the power supply must have an output of 5V and 2A.
How do I know it’s time to replace the cartridge? Do I need to buy an extra cartridge right now?
You need to replace the cartridge every 3-6 months. Please note, the cartridge lifespan depends on the air and water quality.
How to install Evapolar?
evaLIGHT is very easy to use and is ready to operate right out of the box. All you need to do is fill the water tank and plug in the device. The water tank needs to be refilled every 3-5 hours as the water evaporates. You can find more detailed instructions on using evaLIGHT in the box.
Evapolar has 1 year warranty. In case of a breakdown, contact our support service at: .
If your evaLIGHT requires to be repaired you can ship the unit to us. We have stocks in USA, Europe and China for your convenience. Also you can send your device to us by our official distributors.
Does shipping costs include taxes?
Unfortunately, taxes vary from country to country in every and IndieGoGo platform doesn’t allow to charge them. So, please take into consideration tax payment rules according to import laws of your country when making contribution.
Where do you produce the devices?
Our production facilities are currently located in China. Evapolar production management controls manufacturing in order to ensure the highest quality standards of our products.
Why do you call it an ‘air conditioner’?
Mainly because Evapolar air coolers really blow out the cooled air. Please, check the table of outgoing air temperature on our page. Evapolar products work on power of water evaporation. Devices of this type have multiple names depending on the country – air cooler, desert cooler, evaporative air conditioner etc. Unlike other small desktop device Evapolar has an impressive efficiency for its size so we prefer to call it evaporative air conditioner.
More info here: Evapolar
Thanks for reading,